- 46 -
Four Screws
Quatre vis
Cuatro Tornillos
➢
Lay unit on floor bottom up with
nozzle flat.
➢
Install the four screws to the nozzle
cover.
➢
Route nozzle hose to hose holder.
Align nozzle hose bracket with
retaining bracket on body and slide
down unit it clicks into place.
➢
Return the vacuum cleaner to the
upright position before plugging
into an electrical outlet.
Cleaning Agitator
➢
Clean agitator after every five uses
and every time the belt is replaced
.
➢
Remove lower plate
. (
See
REPLACING BELT, p. 42, 44)
➢
Cut off any hair, thread, string,
carpet pile, and lint entangled
around agitator with a pair of
scissors
.
➢
Remove agitator. (See REPLACING
BELT, p. 44)
➢
Remove any string or debris located
on the end caps, washers or agitator
shaft
.
➢
Reinstall agitator and lower plate
.
(
See REPLACING BELT, p. 44)
Содержание MC-UG323
Страница 53: ... 53 NOTES REMARQUES NOTAS ...