background image

19

ENGLISH

Replace the battery 

(Battery disposal)

1

Press “OFF”, and remove 

the battery cover

① 

Remove the 
screws (2 places)

Remove the battery cover

① 

Set the battery in

② 

Insert the new 
battery connector 
in until it “clicks”

3

Set the new battery in

Straighten it and insert it

① 

Fit the lead wires in as per the following illustration 
in the sequence of (the little one) 

 (the big one) 

connectors so that they do not get enmeshed

② 

Install the battery 
cover

③ 

Tighten the screws 
(2 places)

4

Install the battery cover

Battery

2

Remove the connectors, 

and take the battery out

Take the connectors (2 sets) 
out, and

 

① 

While pressing on the 
connector flanges

② 

Pull the connectors apart

(The big one)

(The little one)

Lead wires

The battery is a consumable!

If the operating time reduces significantly even after proper recharging, it means the battery has reached the end of its 
service life. Please replace it to the new battery. 
You can purchase the replacement battery (sold separately) at the place where you purchased the unit.

About the rechargeable lithium-ion battery

The usable time reduces as you continue to repeatedly use the unit. The life of the battery depends on factors such as the ambient 

temperature, and amount of time it is used, and the length of charge/discharge cycles will become shorter depending on usage conditions.

● 

Before removing the battery, operate the main unit repeatedly until the battery is discharged completely.

● 

The appliance must be disconnected from the supply mains when removing the battery.

The battery is to be disposed of safely.

The used battery should not be disassembled and disposed it together with normal household waste. Please take it to appropriate collection points in 
accordance with your municipal rules. For more information, contact with the retailer or your local authorities in charge of waste management.

Handling of used batteries

Use adhesive tape to insulate the connector of the battery.

Do not disassemble the battery.

Request

Содержание MC-SBV01









































Отзывы: