Panasonic MC-SB53KH046, Руководство по эксплуатации

Страница: 12 / 84

To change
the clean sensor’s
sensitivity settings
Vacuuming
(Continued)
EN12
There are infants around, and it is hay fever season...
I want to be more careful about vacuuming
●
Set the clean sensor’s sensitivity to “Careful”
then use it.
You are concerned that the clean lamp
(red) does not light up / does not go out
/ lights up too much
●
Wipe away any debris or dust that is on the
sensor with a soft cloth, etc. (P. EN17)
●
When you are concerned that the lamp lights up
too much, set the clean sensor’s sensitivity to
“Convenient” then use it.
Lamp status Sensor sensitivity
Lit
Normal
For regular vacuuming
(Setting when purchased)
Rapidly
flashes
(2 to 3
times per
second)
Careful
For careful vacuuming
◦
Increase the sensitivity, and the
lamp (red) sensitively lights up to
even a small amount of dust.
Slowly
flashes
(Once per
every 2
seconds)
Convenient
The lamp (red) lights up when
something is hard to vacuum up
◦
Lower the sensitivity, and
suppress the lamp lighting up
2
Press , and select your
desired sensitivity
(it switches each time it is pressed)
◦
The settings are stored until they are next changed.
3
Press
(settings completed)
(you are notified of the current settings)
1
While pressing , press
release , then continue pressing
(pressed down)
for 5 seconds or longer
(Lit) (Rapidly flashes) (Slowly flashes)
Red Red Red
(Unlit)
The clean lamp notifies you by lighting up!
Clean lamp
The clean lamp (red) flashes to let you know it has found dirt you can’t see .
(It detects very fine house dust, even pollen)
■
Clean sensor
Clean
Lighting
A lot of dust
Flashing Goes out Flashing rapidly
Red Red Red Red Red Red Red Red Red
Red Red Red
Red Red Red
Red Red Red
Red Red Red