3. Loop the other end of the belt over the belt pulley on the
agitator.
4. Install agitator by placing the rounded portion of the end
caps down into the slots in the nozzle base.
5. Press firmly, checking to see that each end is completely
inserted.
6. Check to see that the belt is centered on the belt pulley and
that the agitator turns freely.
7. Replace
nozzle
cover
(See
NOZZLE
COVER
INSTALLATION.
4.3. Belt
4.3.1. Removal
1. Remove the nozzle cover (see NOZZLE COVER
REMOVAL).
2. Remove agitator (see AGITATOR REMOVAL).
3. Remove the broken or worn belt and replace with new belt.
4.3.2. Installation
1. Place new belt around the motor shaft.
2. Loop other end of belt around agitator.
3. Replace
agitator
assembly
(see
AGITATOR
REPLACEMENT).
4. Replace
nozzle
cover
(see
NOZZLE
COVER
REPLACEMENT).
4.4. Nozzle Motor
4.4.1. Removal
1. Remove the nozzle cover (see NOZZLE COVER
REMOVAL).
14
MC-GG529-00
