Alignment
Tabs
1
2
Alignment Tabs
Alignment Tabs
1
3
D) DUST BIN FILTER CHANGING AND CLEANING
Check primary filter frequently and clean when dirty. Remove the dust bin assembly as outlined in the DUST BIN CLEANING
section and empty contents of dust bin.
Lid
Filter Screen
Primary Filter
1
1
Grasp filter screen, rotate counter-clockwise and lift out.
Grasp primary filter, rotate counter-clockwise and lift out.
Clean primary filter by gently tapping over a trash container.
CAUTION:
Make sure dust bin is empty before fil-
ter is removed.
CAUTION:
Rinse with water only, do not use detergent or soap.
A
Allllo
ow
w ffiilltte
err tto
o d
drry
y 2
24
4 h
ho
ou
urrs
s b
be
effo
orre
e p
pu
uttttiin
ng
g iitt b
ba
ac
ck
k
iin
ntto
o tth
he
e d
du
us
stt b
biin
n..
When the cleaning of the filter no longer restores vacuum cleaner suction to full power you
need to replace the filter.
Before replacing the primary filter it is a good idea to clean the inside of the dust bin and lid area.
Rotate filter clockwise until slots lock onto tabs in lid.
To re-install the filter screen, align tabs on filter screen with
tabs on lid.
Rotate filter screen clockwise to lock in place.
CAUTION:
When cleaning filter, do not use brush
or other similar tools that would damage the filter
itself.
Simply tap the filter on the edge of cap for normal dry cleaning.
For more thorough cleaning, rinse outside of filter with water and allow to dry thoroughly before reuse in vacuum cleaner.
