background image

CAUTION:

Do not use attachments if they are  wet.

A

ttachments used in dirty areas, such as under a refrigerator,

should not be used on other surfaces until they are washed. They could leave marks.

To rotate the handle to the storage position when the vacuum cleaner is not in use,
press handle release button and rotate handle counter-clockwise for easy storage.

NOTE:

You should hear a noticeable “click” sound when handle reaches the storage

position.

WARNING: Electrical Shock And Personal Injury Hazard

Wrapping the mains lead too tightly around the hooks may cause damage to
the lead. A damaged lead is an electrical shock hazard and could cause per-
sonal injury or damage.

MAINTENANCE AND SERVICING

A) VACUUM CLEANER STORAGE

Handle
Release
Button

Operating
Position

Storage
Position

Always follow all safety precautions when cleaning and servicing the vacuum cleaner.

WARNING: Electrical Shock And Personal Injury Hazard

Disconnect from electrical supply before servicing or cleaning the vacuum cleaner. Failure to do so could result in elec-
trical shock or personal injury from vacuum cleaner suddenly starting.

B) CLEANING EXTERIOR AND ATTACHMENTS

Disconnect mains plug from wall outlet.

Clean exterior using a clean, soft cloth that has been dipped in a solution of mild liquid detergent and water, then wrung dry. Wipe dry
after cleaning.

DO NOT

drip water on vacuum cleaner.

Wash attachments in warm soapy water, rinse and air dry.

Do not clean in dishwasher.

DO NOT

use tools if they are wet.

Содержание MC-E4063K



















Отзывы: