9
2. Push hose in place on curved pipe unit, and press each of
the hose wires into retainer slots.
3. Plug curved pipe unit and P.C.B. assembly wires to the
same color hose wires (blue wire to blue wire, white to
white, yellow to yellow). Press wires into retainer slots.
4. Install curved pipe unit into left handle half. Align tab on
handle with slot in curved pipe unit and align tab on
curved pipe unit with slot in handle.
5. Insert switch/PCB assembly into slots in handle.
6. Install right handle half and secure with two (2) screws.
7. Install one (1) screw in handle and sliding knob.
8. Install the switch cover.
9. Install one (1) screw.
