manualshive.com logo in svg

Panasonic MADDT1105N, Технические характеристики, Страница: 49 / 58

Поделиться
Скачать
Panasonic MADDT1105N Скачать руководство пользователя страница 49

 No.SX-DSV01676

   

- 46 - 

R2

     

                                                                                                 

Motor Company, Matsushita Electric Industrial Co., Ltd.

 

 
 

14. Others 

 

-

 

Precautions for export of this product and equipment incorporating this product 

If the end user or end purpose of this product relates to military affairs, armament and so on, this 

product may be subject to the export regulations prescribed in "Foreign Exchange and foreign 

Trade Control Law”.    To export this product, take examination, and follow the required export 

procedure. 

 

- We cannot warrant this product, if it is used beyond the specified operating conditions. 

 

- Compliance with the relevant standards should be considered by the user. 

 

- The final decision on the 

compatibility with the installations and components at the user's site, in terms of

 

structure, dimensions, characteristics and other conditions, should be made by the user. 

 

-

 

If the specifications of your installations are changed, exercise thorough caution to ensure their 

compatibility with the motor and servo drive. 

 

- For performance improvement or other reasons, some components of this product may be modified in 

a range that satisfies the specifications given in this document. 

 

- Any specification change shall be based on our authorized specifications or the documents presented by   

the user. If a specification change may affect the functions and characteristics of this product, we 

 

will produce a trial product, and conduct examination in advance. Note that the produce price may be 

changed with a change in is specifications. 

 

- We have made the best efforts to ensure the product quality. However, complete equipment at your site 

may malfunction due to a failure of this product. Therefore, take precautions by providing fail-safe design 

at your site, and ensure safety within the operating range of the work place. 

 

- Failure of this product depending on its content, may generate smoke of about one cigarette. Take this into 

consideration when the application of the machine is clean room related. 

 

- It the motor shaft is not electrically grounded, it may cause an electrolytic corrosion to the bearing, depending 

on the condition of the machine and it’s mounting environment, and may result in the bearing noise. 

Checking and verification by customer is required. 

 

 

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Содержание MADDT1105N



























































Отзывы:

Нет отзывов