Panasonic LX600E, Руководство по эксплуатации

Страница: 40 / 43

English - 39 -
• Carry out first time installation on your TV. The setup
wizard will be displayed after the installation process
is completed
Setup process
The wizard will guide you through the setup process.
• If you carry out first time installation on your TV,
the Alexa setup wizard will be displayed after the
installation process is completed. On the first screen
highlight Learn More option and press OK . On the
next screen you will be informed about the feature.
Highlight Start and press OK to proceed.
If you skip the setup wizard after the first time ins-
tallation you can use the Works With Alexa option
in the Settings>System>Voice Assistant menu to
carry out the setup later manually. On the first screen
you will be informed about the feature. Highlight Start
and press OK to proceed.
• An authentication code will be created and displayed
on the screen. Use your computer or any other device
with internet access to go to the internet address
(URL) shown on the screen. You will be directed
to a page where you can sign in to your Amazon
account first, if you are not already signed in. Then
you will be directed to a page where you can enter
the authentication code you see on the TV and link
your TV to your Amazon account.
• If the linking process was successful you will be
asked to determine a name for your TV, called
‘Friendly Name’( FN ). A ‘Friendly Name’ is a name
that reminds you of your TV, such as ‘Living Room
TV’, ‘Kitchen TV’, ‘Dining Room TV’, etc. Choose an
easy-to-say name. You will say this name to tell Alexa
which TV to control. When you are done, highlight
OK and press OK .
• Examples about the use of the feature will be
displayed on the next screen. Press OK to finish
the setup.
If you carried out the setup after the first time instal-
lation you will return to the first screen of the setup
wizard when you press OK . In that case press Exit
or highlight Setup Later and press OK in order to
exit the setup.
Once the setup is complete, you will be able to control
the functions of your TV with Alexa.
Note: Make sure that the devices are connected to the internet.
Example Commands
Here are some voice commands that you can use:
Command Function
Alexa, turn on ‘ FN ’ Powers on the TV
Alexa, turn off ‘ FN ’ Powers off the TV
Alexa, play ‘ FN ’ Starts media playback
Alexa, pause ‘ FN ’ Pauses media playback
Command Function
Alexa, resume ‘ FN ’ Resumes media playback
Alexa, stop ‘
FN
’ Stops media playback
Alexa, fast forward on ‘ FN ’ Advances media in fast
forward mode
Alexa, rewind on ‘ FN ’ Rewinds media
Alexa, set the volume of
‘ FN ’ to 50
Sets the volume to the
specified level
Alexa, turn the volume up
on ‘ FN ’
Increases volume by 10
units
Alexa, turn the volume
down on ‘ FN ’
Decreases volume by
10 units
Alexa, mute ‘ FN ’ Mutes sound
Alexa, unmute ‘ FN ’ Unmutes sound
Alexa, change the input to
“input_name” on ‘ FN ’
The TV switches to the
input source with the spec-
ified name (e.g. HDMI 1)
Alexa, change channel to
"channel_number" on ‘ FN ’
The TV switches to the
channel with the specified
number (e.g. channel 200)
Alexa, change channel to
“channel_name" on ‘ FN ’
The TV switches to the
channel with the specified
name
Alexa, channel up on ‘ FN ’
The TV switches to the
next higher channel, if any
available
Alexa, channel down
on ‘ FN ’
The TV switches to the
next lower channel, if any
available
Alexa, next channel on
‘ FN ’
The TV switches to the
next channel on the
channel list
FN is the abbreviation for ‘Friendly Name’.