7 Adjustment
7.1. Matrix Chart for Replaced Part and Necessary Adjustment
The relation between Replaced part and Necessary Adjustment is shown in the following table.
When concerned part is replaced, be sure to achieve the necessary adjustment(s).
*1 NOTE:
In the case of replacing a single part in the scratches or damage, the adjustment is not necessary.
7.2. Matrix Chart for Cleaning Portion and Necessary Adjustment
The relation Cleaning portion and Necessary Adjustment is shown in the following table.
When concerned part is replaced, be sure to achieve the necessary adjustment(s).
Replaced Part
Necessary Adjustment
Electrical
Adjustment
1st Lens Frame
Adjustment
DECORATION RING (*1)
○
○
DUST PROOF RING (*1)
○
○
FILTER RING (*1)
○
○
SHADING FRAME
- - -
- - -
L MOUNT UNIT
- - -
- - -
OIS SWITCH
- - -
- - -
REAR FRAME UNIT
- - -
- - -
LENS MOUNT CONTACT UNIT
- - -
- - -
FLOATING RUBBER
- - -
- - -
LENS P.C.B.
◎
- - -
ZOOM DRIVE PIN
- - -
- - -
RING MOUNT BASE UNIT
- - -
- - -
1ST LENS HOLDER
◎
◎
WAVE WASHER
- - -
- - -
DIRECT FRAME SHADING SHEET
◎
◎
2ND LENS FRAME2 UNIT
◎
◎
3RD LENS FRAME3 UNIT
◎
◎
5TH LENS FRAME2 UNIT
◎
◎
CAM BARREL1 UNIT
◎
◎
Inside
surface of the Lens
◎
◎
Cleaning Portion
Necessary Adjustment
Electrical
Adjustment
1st Lens Frame
Adjustment
Outside
surface of the Lens
- - -
- - -
1
8