6.2.2.9. Removal of the OIS Switch and
the Rear Frame Unit
1. Hook the upperside hook.
6.2.2.10. Installation of the L Mount Unit
Screw Order
① → ② → ③
Torque
8 ± 1 N
・
cm
Then, push the underside hook into.
2. Install the Rear Frame Unit.
3. Connect FPC to a connector of the Lens P.C.B. Unit.
4. Tighten 3 screws (E) in numerical order
by using the torque driver with specified torque.
1. Install the L Mount Unit.
2. Tighten 1 screw (C) and 3 screws (D) in numerical
order by using the torque driver with specified torque.
Screw Order
① → ② → ③ → ④
Torque
：
screw (D)
20 ± 1.2 N
・
cm
Torque
：
screw (C)
8 ± 1 N
・
cm
1
6
