- 25 -
Preparation
Perform these settings if you need to.
About the Setup Menu
[CLOCK SET], [ECONOMY] and [AUTO REVIEW] are important items. Check their
settings before using them.
•
In the Intelligent Auto Mode, only [CLOCK SET], [BEEP], [LANGUAGE] and [STABILIZER
DEMO.]
(P30)
can be set.
For details on how to select the [SETUP] menu settings, refer to
P22
.
•
Refer to
P18
for details.
•
When you connect the camera to a TV, the volume of the TV speakers does not change.
•
The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear different from real life on the LCD monitor. However, this does not affect the
recorded pictures.
•
The LCD monitor automatically returns to normal brightness after 30 seconds when recording
in Power LCD Mode. Press any button to make the LCD monitor bright again.
•
If the screen is difficult to see because of bright light shining on it, use your hand or another
object to block the light.
•
The number of recordable pictures decreases in Auto Power LCD Mode and Power LCD Mode.
•
[AUTO POWER LCD] cannot be selected in Playback Mode.
U
[CLOCK SET]
Setting Date/Time.
r
[BEEP]
This allows you to set the beep and shutter sound.
r
[BEEP LEVEL]:
[
s
] (Muted)
[
t
] (Low)
[
u
] (High)
[SHUTTER VOL.]:
[
] (Muted)
[
] (Low)
[
] (High)
[BEEP TONE]:
[
]/[
]/[
]
[SHUTTER TONE]:
[
]/[
]/[
]
u
[VOLUME]
Adjust the volume of the speaker to any of 7 levels.
[LCD MODE]
These menu settings make it easier to see the LCD monitor when
you are in bright places.
[OFF]
„
[AUTO POWER LCD]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
…
[POWER LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
