Panasonic Lumix DMC-TZ18EB, Руководство по обслуживанию, Страница: 18 / 74

18
3. Error Code List
The error code consists of 8 bits data and it shows the following information.
Attribute Main item Sub item Error code Contents (Upper) Error Indication
High 4bits Low 4 bits Check point (Lower) Detecting
device
Part/Circuit
LENS Lens drive OIS 18*0 1000 PSD (X) error. Hall element (X axis) position detect
error in OIS unit. OIS X LENSu NG
OIS Unit
2000 PSD (Y) error. Hall element (Y axis) position detect
error in OIS unit. OIS Y
OIS Unit
3000 GYRO (X) error. Gyro (IC7103) detect error on Top
Operation P.C.B. GYRO X GYRO NG
IC7103 (Gyro element) or IC6001 (VENUS 6)
4000 GYRO (Y) error. Gyro (IC9701) detect error on Gyro
P.C.B. GYRO Y
IC9701 (Gyro element) or IC6001 (VENUS 6)
5000 MREF error (Reference voltage error). OIS REF LENSSd/DSP
NG
IC9101 (LENS drive) or IC6001 (VENUS 6)
6000 Drive voltage (X) error. OISX REF LENSu/LENS
FPC
LENS Unit, LENS flex breaks, IC6001(VENUS 6) AD
value error, etc.
7000 Drive voltage (Y) error. OISY REF
LENS Unit, LENS flex breaks, IC6001(VENUS 6) AD
value error, etc.
Zoom
(C.B.) 0?10 Collapsible barrel Low detect error ZOOM L ZOOMm/
LENSu
(Collapsible barrel encoder always detects High.)
Mechanical lock, FP9005-(29) signal line or IC6001
(VENUS 6)
0?20 Collapsible barrel High detect error ZOOM H
(Collapsible barrel encoder always detects Low.)
Mechanical lock, FP9005-(29) signal line or IC6001
(VENUS 6)
0?30 Zoom motor sensor error. ZOOM ENC
Mechanical lock, FP9005-(40), (42) signal line or
IC6001 (VENUS 6)
0?40 Zoom motor sensor error. (During monitor mode.)
Mechanical lock, FP9005-(40), (42) signal line or
IC6001 (VENUS 6)
0?50 Zoom motor sensor error. (During monitor mode with
slow speed.)
Mechanical lock, FP9005-(40), (42) signal line or
IC6001 (VENUS 6)
0?60 Phase error or operation failure of zoom Lens/motor/
encoder. (IMPACT)
Mechanical lock, zoom encoder.
Focus 0?01 HP High detect error
(Focus encoder always detects High, and not
becomes Low) FOCUS L LENS FPC/
DSP
Mechanical lock, FP9005-(29) signal line or IC6001
(VENUS 6)
0?02 HP Low detect error
(Focus encoder always detects Low, and not
becomes High) FOCUS H
Mechanical lock, FP9005-(29) signal line or IC6001
(VENUS 6)
Lens 18*1 0000 Power ON time out error. LENS DRV LENSu
Lens drive system
18*2 0000 Power OFF time out error.
Lens drive system