Panasonic Lumix DMC-LZ30E, Руководство по обслуживанию

Страница: 27 / 33

27
8.3.9. Light / S.S / Preview Calibration
1. Setting the DSC
1. Set the battery to the camera.
2. Turn off the power.
3. Press "Tele" + "Menu/Set" + "Playback" key at the same time. It starts in the state of "Engineer Mode" automatically.
4. Press "Playback" key to enter selection menu.
5. Put the DSC on a desk Where a lens side is turned downward in order to make "all black" environment.
2. Execute Calibration
1. Press "Right Key" or "Left Key" or "Up Key" or "Down Key" to change selected item.
2. Choose "
Light/S.S(BLACK) ", and press "Display Key".
3. Change the flag status of "Disable" from 00001 to 00000 by operating "Right Key" or "Left Key", and then press "Menu/Set
Key".
4. Press "Menu/Set Key" again, and select "OK", and press "Menu/Set Key" to start checking.
5. When calibration finishes, the screen will show the result "OK" or "NG".
6. Press "PLAYBACK Key" to return to calibration menu.
* Carrying out this adjustment after 25 minutes after power ON is recommended.
* It takes several minutes.
8.3.10. FLASHWB Calibration
1. Setting the DSC
1. Set the battery to the camera.
2. Turn off the power.
3. Press "Tele" + "Menu/Set" + "Playback" key at the same time. It starts in the state of "Engineer Mode" automatically.
4. Press "Playback" key to enter selection menu.
5. In dark environment not Light is reflected
6. Set gray chart (RFKZ0612) from DSC at 500 mm.
2.Execute Calibration
1. Press "Right Key" or "Left Key" or "Up Key" or "Down Key" to change selected item.
2. Choose "
FLASH WB ", and press "Display Key".
3. Change the flag status of "Disable" from 00001 to 00000 by operating "Right Key" or "Left Key", and then press "Menu/Set
Key".
4. Press "Menu/Set Key" again, and select "OK", and press "Menu/Set Key" to start checking.
5. When calibration finishes, the screen will show the result "OK" or "NG".
6. Press "PLAYBACK Key" to return to calibration menu.