Panasonic Lumix DMC-LZ10E Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 50

Panasonic Lumix DMC-LZ10E Скачать руководство пользователя страница 43

S6. Replacement Parts List

S-11

E.S.D. standards for Electrostatically Sensitive Devices, refer to PREVENTION OF

ELECTROSTATIC DISCHARGE (ESD) TO ELECTROSTATICALLY SENSITIVE (ES) DEVICES

section.
Definition of Parts supplier:

1.

Parts marked with [MBI] in the remarks column are supplied from Matsushita

Battery Industrial Co., Ltd.

2.

Parts marked with [PAVC-CSG] in the remarks column are supplied from PAVC

COMPANY CS Group (PAVC-CSG).

Others are supplied from PAVCSG (ASPC).

1.* Be sure to make your orders of replacement parts according to this list.
2. IMPORTANT SAFETY NOTICE

Components identified with the mark have the special characteristics for safety.

When replacing any of these components, use only the same type.

3. Unless otherwise specified,

All resistors are in OHMS, K=1,000 OHMS. All capacitors are in MICRO-FARADS (uf), P=uuF.

4. The marking (RTL) indicates the retention time is limited for this item. After the discontinuation

of this assembly in production, it will no longer be available.

5. Supply of CD-ROM, in accordance with license protection, is allowable as replacement parts

only for customers who accidentally damaged or lost their own.

Note:

«
...
41
42
43
44
45
...
»

Содержание Lumix DMC-LZ10E



















































Отзывы:

Нет отзывов