Others
Q&A Troubleshooting
- 217 -
VQT4J31
LCD monitor
No picture is displayed on the LCD monitor.
●
[Opt. Viewfinder] is set to [ON].
→ Press [DISP.] button to switch to the LCD monitor display.
●
The Live View Finder (optional) display is selected.
→ Press the [LVF/LCD] button of the Live View Finder (optional) to switch to the LCD monitor
display.
Brightness is unstable.
●
Aperture value is set while shutter button is pressed halfway. (Does not affect recorded picture.)
This symptom may also occur when the brightness changes because the zoom is operated or the
camera is moved. This is the automatic aperture operation of the camera and is not a malfunction.
Monitor flickers indoors.
●
The LCD monitor may flicker for a few seconds after turning on. This is an operation to correct
flicker caused by lighting such as fluorescent lights, LED lights etc. and is not a malfunction.
Monitor is too bright/too dark.
●
[LCD Mode] is activated
(→31)
●
Use [LCD Display] to adjust the brightness of the LCD monitor.
(→31)
Black/blue/red/green dots or interference appears. Monitor looks distorted when
touched.
●
This is not a fault, and will not be recorded on the actual pictures.
Even when you press the [LVF/LCD] button of the Live View Finder (optional), the display
does not switch between the LCD monitor and Live View Finder.
●
When it is connected to a computer or printer, the camera can display pictures on the LCD monitor
only.