125
SQW0740
4K Photo and Drive Settings
Adjusting the focus after recording ([Post Focus]/[Focus Stacking])
3
(When selecting [Range Merging])
Touch the focus point
•Select positions at two or more points.
•Focus positions between the two points are selected and the
range of the in-focus portion is displayed.
•The ranges that are greyed out are positions that cannot be
selected, or that would produce an unnatural result if selected
for focus stacking.
•Touch a position again to deselect it.
•If you drag the screen you can then continue to select positions.
Operation
Touch operation
Description
Touch
Select the touched position
[Fn2]
[Set/Cancel]
Set/Clear the position
[DISP.]
[All]
Select all positions (Before
selecting position)
[Reset]
Deselect All (After selecting
position)
[MENU/SET]
Combine and save picture
Reset
Reset
Set/Cancel
Set/Cancel
Reset
Reset
Set/Cancel
Set/Cancel
4
Touch [
] to combine and save the picture
•
The picture will be saved in JPEG format with recording information (Exif information) from the
nearest position’s picture, including its shutter speed, aperture and ISO sensitivity information.
●
In the following cases, [Focus Stacking] may produce an unnatural picture:
•If the subject is in motion
•If there are large differences in distance to the subject
•If there is significant blurring (recording with a larger aperture might make the picture less
unnatural)
●
Auto compensation is applied to deviations among pictures due to camera shake. In such cases,
the angle of view will be slightly narrower at the time of focus stacking.
●
Only pictures taken using [Post Focus] are eligible for [Focus Stacking].
