background image

Safety

2

Safety

Dear Customer,

We would like to take this opportunity to 
thank you for purchasing this Panasonic 
Digital Camera. Please read these 
Operating Instructions carefully and 
keep them handy for future reference.

Information for Your 
Safety

Carefully observe copyright laws.
Recording of pre-recorded tapes or 
discs or other published or 
broadcast material for purposes 
other than your own private use may 
infringe copyright laws. Even for the 
purpose of private use, recording of 
certain material may be restricted.

• Please note that the actual controls 

and components, menu items, etc. of 
your Digital Camera may look 
somewhat different from those shown 
in the illustrations in these Operating 
Instructions.

• SD Logo is a trademark.
• Other names, company names, and 

product names printed in these 
instructions are trademarks or 
registered trademarks of the 
companies concerned.

WARNING
TO REDUCE THE RISK OF FIRE 
OR SHOCK HAZARD AND 
ANNOYING INTERFERENCE, USE 
ONLY THE RECOMMENDED 
ACCESSORIES AND DO NOT 
EXPOSE THIS EQUIPMENT TO 
RAIN OR MOISTURE. DO NOT 
REMOVE THE COVER (OR BACK); 
THERE ARE NO USER 
SERVICEABLE PARTS INSIDE. 
REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.

THE SOCKET OUTLET SHALL BE 
INSTALLED NEAR THE 
EQUIPMENT AND SHALL BE 
EASILY ACCESSIBLE.

CAUTION

Danger of explosion if battery is 
incorrectly replaced. Replace only 
with the same or equivalent type 
recommended by the manufacturer. 
Dispose of used batteries according 
to the manufacturer’s instructions.

Extremely high precision technology 
is employed to produce the LCD 
monitor/Viewfinder screen. The 
result is more than 99.99% effective 
pixels with a mere 0.01% of the 
pixels inactive or always lit. However, 
this is not a malfunction and does 
not affect the recorded pictures.

LC1EB.book  2 ページ  2004年3月30日 火曜日 午前9時2分

Содержание LUMIX DMC-LC1EB

































































































































Отзывы: