21
Preparation/Basic
(ENG) SQT0790
Rotating:
Selection of items or setting of values is performed during the various settings.
•
These operating instructions describe operations of the front dial/rear dial as follows:
Allows you to set the aperture, shutter speed, and other settings when in
/
/
/
modes.
•
In [Dial Set.] in the [Custom] menu, you can change the operation methods of the rear dial and
front dial.
Temporarily changing the items assigned to the front/rear dials ([Dial Operation
Switch])
You can temporarily change the items assigned to the front/rear dials using the function
button to which [Dial Operation Switch] is assigned.
[Dial Operation Switch] is assigned to [Fn13] at the time of purchase. (P24)
•
You can set the items to be assigned temporarily to the front/rear dials in [Dial Operation Switch
Setup] in [Dial Set.] in the [Custom] menu.
1
Press [Fn13]
A
.
•
A guide will be displayed showing the items temporarily
assigned to the front/rear dials.
2
Rotate the front/rear dials while the guide is
displayed.
•
The settings of the items assigned to the dials will change.
3
Press [MENU/SET] and set.
•
You can also complete this step by performing either of the operations below:
–
Press the shutter button halfway
–
Press [Fn13]
•
Items that are temporarily assigned to the front/rear dials can be used only while the guide
(step
1
) or setting screen (step
2
) is displayed.
Front Dial/Rear Dial
e.g.: When rotating
the front dial to the
left or right
e.g.: When rotating
the rear dial to the
left or right
Mode dial
Front dial
Rear Dial
Programme Shift
Programme Shift
Aperture value
Aperture value
Shutter speed
Shutter speed
Aperture value
Shutter speed
A
DMC-GX8A&GX8H&GX8K_GCGH-SQT0790_eng.book 21 ページ ２０１５年７月８日 水曜日 午前９時１１分
