Preparation/Basic
12
SQT0426 (ENG)
∫
Lens
•
The interchangeable lens (H-FS12032) does not have a focus ring, but you can use manual
focus by operating the camera. Refer to P23 for details.
1
Remove the hot shoe cover by pulling it in the
direction indicated by arrow
2
while pressing
it in the direction indicated by arrow
1
.
2
Turn off the camera and the flash.
3
Slide the flash firmly all the way into the
camera’s hot shoe until it clicks into place.
•
Turn on the camera and the flash when recording images.
A
Flash ON/OFF switch
•
To remove the flash, pull the flash in the direction of the arrow while
pressing and holding the lock release button
B
.
H-FS12032
H-FS35100
H-X015
1
Lens surface
2
Tele
3
Zoom ring
4
Wide
5
Contact point
6
Lens fitting mark (P15)
7
Focus ring
8
Decoration ring
•
Remove this cover when using the lens
hood.
9
Aperture ring
•
Rotate this to adjust the aperture value.
•
If you set the camera to Aperture-Priority AE
Mode or Manual Exposure Mode, the
aperture value of the ring will be enabled.
•
If you set the position of the aperture ring to
[A], the aperture value of the camera will be
enabled.
•
When the aperture ring is enabled, check if
the aperture value has changed after
attaching or removing the decoration ring.
10 [AF/MF] switch
•
When either the [AF/MF] switch of the lens or
the setting of the camera is set to [MF],
Manual Focus (MF) is enabled.
Attaching the Flash (Supplied)
3 4
5
6
1 2
7
4
5
6
1
2
3
7
8 9
10
5
6
1
DMC-GM5K&GM5L&GM5W-SQT0426_eng.book 12 ページ ２０１４年９月１０日 水曜日 午後１１時１分
