Panasonic Lumix DMC-GH2H Скачать руководство пользователя

Страница: 183 / 200

183

VQT3A55

Others

[READ ERROR/WRITE ERROR
PLEASE CHECK THE CARD]

•

It has failed to read or write data.

Remove the card after turning the power [OFF]. Insert the card again, turn the power on,

and try to read or write the data again.

•

The card may be broken.

Insert a different card.

[CANNOT RECORD DUE TO INCOMPATIBLE FORMAT (NTSC/PAL) DATA ON THIS
CARD.]

If you want to delete some pictures, format the card after saving necessary data on a PC

etc. (P62)

Insert a different card.

[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]

•

Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures in

[AVCHD].

Also, use a card with SD Speed Class with “Class 6” or higher when recording motion pictures

in [MOTION JPEG].

•

In the event that it stops even after using a “Class 4” card or higher, the data writing speed has

deteriorated so it is recommended to make a backup and then format (P62).

•

Depending on the type of the card, motion picture recording may stop in the middle.

[THIS CARD IS NOT FORMATTED WITH THIS CAMERA, AND NOT SUITABLE FOR
MOVIE RECORDING.]

•

The writing speed is lower if the card has been formatted using a PC or other equipment. As a

consequence, motion picture recording may stop in the middle. If this happens, make a

backup of the data and format (P62) the card in this unit.

[A FOLDER CANNOT BE CREATED]

•

A folder cannot be created because there are no remaining folder numbers that can be used.

(P165)

Format the card after saving necessary data on a PC etc. (P62) If you execute

[NO.RESET] in the [SETUP] menu after formatting, the folder number is reset to 100.

(P62)

[PICTURE IS DISPLAYED FOR 16:9 TV]/[PICTURE IS DISPLAYED FOR 4:3 TV]

•

The AV cable is connected to the camera.

Press [MENU/SET] if you want to delete this message at once.

Select [TV ASPECT] in the [SETUP] menu if you want to change the TV aspect. (P59)

•

This message also appears when the USB connection cable is connected to the camera only.

In this case, connect the other end of the USB connection cable to a PC or a printer. (P163, 166)

[THIS BATTERY CANNOT BE USED]

•

The battery cannot be recognised by the camera.

Use a genuine Panasonic battery. If this message is displayed even when a genuine

Panasonic battery is used, contact the dealer or your nearest Service Centre.

•

The battery cannot be recognised as its terminal is dirty.

Remove any dirt etc. from the terminal.

[PLEASE MAKE SURE TO TURN ON THE POWER OF EXTERNAL MICROPHONE.]

•

When attaching the stereo microphone (DMW-MS1; optional), check the battery status and

make sure the power is on before use. (P172)

DMC-GH2KGN-VQT3A55_eng.book 183 ページ２０１０年１０月１８日　月曜日　午後６時５４分

Содержание Lumix DMC-GH2H









































































































































































































Результаты поиска

Содержание Lumix DMC-GH2H

Отзывы:

Похожие инструкции для Lumix DMC-GH2H

Бренды по названию

Популярные бренды

Panasonic Lumix DMC-GH2H, Руководство по эксплуатации

Результаты поиска

Содержание Lumix DMC-GH2H

Отзывы:

Похожие инструкции для Lumix DMC-GH2H

Бренды по названию

Популярные бренды