Panasonic Lumix DMC-FZ5GN, Руководство по эксплуатации

Страница: 21 / 116

Preparation
21
VQT0Q40
Setting Date/Time (Clock Set)
∫
Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on, the
following screen appears.
• When pressing the [MENU] button, the
screen shown in step 1 appears.
• The screen disappears in about
5 seconds. Turn the camera on again or
select [CLOCK SET] on the [SETUP]
menu and then set the clock. (P22)
1
Set date and time.
•
2
/
1
: Select the desired item.
•
3
/
4
: Set date and time.
2
Select [D/M/Y], [M/D/Y] or [Y/M/D].
• Close the menu by pressing the
[MENU] button 2 times after finishing
the setting.
• Check if the clock setting is correct,
after turning the camera off and on.
• When a fully charged battery has been
inserted for more than 24 hours, the clock
setting is stored (in the camera) for at
least 3 months even if the battery is
removed. (The storing time may be
shorter if the battery is not charged
sufficiently.)
If more than 3 months has passed, the
clock setting will be lost. In this case, set
the clock again.
• You can set the year from 2000 to 2099.
The 24-hour system is used.
• If you do not set the date, the date cannot
be printed when you go to a photo studio
for digital printing.
• For the date print setting, refer to P86.
PLEASE SET THE CLOCK
CLOCK SET
MENU
D/M/Y
1 1 JAN 2005 . . 0 0 00 :
CLOCK SET
SET SELECT EXIT
MENU
10:00 11 1.DEC.2005
D/M/Y
CLOCK SET
SET SELECT EXIT
MENU
VQT0Q40ENG.book 21 ページ ２００５年２月１６日 水曜日 午後２時４７分