VQT2G40 (ENG)
26
Basic
Note
•
The screen will change as following when the motion picture button is pressed in steps
3
and
4
.
¢
1 The screen that is displayed during motion picture mode setting is different depending on the
setting of the
[REC MODE]
.
¢
2 [
!
] will not be displayed in the Creative Motion Picture Mode.
Start recording by pressing the motion
picture button.
A
Available recording time
B
Elapsed recording time
•
The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
•
The recording state indicator (red)
C
will flash while recording motion pictures.
•
Focus can be achieved during recording by pressing [FOCUS].
Stop the recording by pressing the motion picture button again.
•
Sound will go off when pressing the motion picture button indicating start/stop of motion
picture recording.
Sound volume can be set in [BEEP LEVEL].
•
If the built-in memory or the card becomes full in the middle of recording, the camera
stops recording automatically.
A
Still picture recording
screen
B
Motion picture mode
setting
¢
1
C
Motion picture
recording screen
D
Still picture mode
setting
¢
2
B
A
C
AUTO
AUTO
AUTO
5
5
R1m19s
R1m19s
R1m19s
3s
3s
3s
DMC-FZ38&FZ35P-VQT2G40_eng.book 26 ページ 2009年6月30日 火曜日 午後6時33分