17
(ENG) VQT2G40
Preparation
Setting Date/Time (Clock Set)
•
The clock is not set when the camera is shipped.
Turn the camera on.
•
The [PLEASE SET THE CLOCK] message
appears. (This message does not appear in
[PLAYBACK] Mode.)
A
[MENU/SET] button
B
Cursor buttons
Press [MENU/SET].
Press
2
/
1
to select the items (year, month,
day, hour, minute, display sequence or time
display format), and press
3
/
4
to set.
‚
: Cancel without setting the clock.
Press [MENU/SET] to set.
•
After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to Recording Mode, and check that the display reflects the settings that were
performed.
•
When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the
“
Changing the clock setting
”
procedure
below.
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press
1
.
•
It can be changed in steps
3
and
4
to set the clock.
•
Once a charged battery has been installed for 24 hours, the clock setting is maintained
for 3 months using the built-in clock battery even without the battery.
Changing the clock setting
DMC-FZ38&FZ35P-VQT2G40_eng.book 17 ページ ２００９年６月３０日 火曜日 午後６時３３分
