12. Others
330
• If you continue to use the same card after changing [System Frequency]
, motion
pictures may not be recorded. To record with the same card, reset [System Frequency] to the
original setting. To record motion pictures with the current setting, try the following:
>
on this unit after saving necessary data on a PC, etc.
>
Insert a different card.
• You may not be able to record for a short while after turning this unit on when using a large
capacity card.
• Depending on the [Rec Format] and [Rec Quality] of a motion picture, the speed class rating
required for the card differs. Use a card that meets the rating. (“About motion picture/4K photo
recording and speed class ratings” on
)
• This phenomenon occurs when the camera is trying to record with highly accurate focus at a
reduced Auto Focus speed, and is not a malfunction.
• When recording in a quiet environment, the sound of aperture, focus or zoom operation may be
recorded in motion pictures.
Focus operation can be set to [OFF] in [Continuous AF]
.
• While recording motion pictures, plugging the aperture of the microphone with a finger may
reduce the level of audio recording or audio may not record at all. Also be careful because the
operation sound of lenses can easily be recorded at this time.
• Use of [Silent Operation] is recommended if you are concerned about operational sounds.
• Is the flash closed? Open the flash.
• When the electronic shutter is used, the flash is not activated.
• When [Silent Mode] is set to [ON], the flash is not activated.
Motion pictures
Recording motion pictures is not possible.
Motion picture recording stops in the middle.
Sometimes it is difficult to focus with Auto Focus when recording 4K motion
pictures.
In motion pictures, abnormal clicking and buzzing sounds are recorded.
The recorded sound is very quiet.
An operation sound is recorded in a motion picture.
Flash
The flash is not activated.