Recording images (advanced)
48
Taking Pictures with Shutter-priority AE
When the shutter speed is set, the aperture
value is set automatically according to the
subject brightness.
e.g.: when you want to record a moving
subject, set the shutter speed higher to make
the picture stable as if the subject stopped.
1
Set the mode dial to [P/A/S]. (P27)
2
Press the [MENU] button.
3
Press
3
/
4
to select [AE MODE].
4
Press
1
to
set to [S].
5
Press the [MENU] button.
• The menu will disappear.
6
Press
3
.
7
Press
2
/
1
to
set the shutter speed.
8
Press the
4
/[REVIEW/SET] button.
• The adjustment display will disappear.
9
Take a picture.
• The brightness of the LCD monitor/Viewfinder may differ from that of the actual
images. Check it using review function or setting to playback mode.
• The recordable range is between 120 cm –
¶
(Tele) and 5 cm –
¶
(Wide).
• In shutter-priority AE mode [
], it is not possible to choose the settings listed
below.
– Slow sync./Red-eye reduction [
] (P38) of the built-in flash
– [AUTO] of ISO sensitivity (P63)
• The available setting range of the shutter speed is adjustable from 8 seconds to
1/2000th.
• When the shutter speed is slow, the use of a tripod is recommended.
• If the aperture value is not properly set, the colour of the F and the shutter speed
values on the LCD monitor/Viewfinder become red.
• If the shutter speed is faster than 1/500th, the aperture value is limited.
2,5
3,4,6,7,8
9
1
REC
1/4
SETUP
3,4
W.BALANCE
AUTO
PICT.SIZE
AE MODE
QUALITY
A
S
1600
AE
P
SELECT
SET
EXIT
MENU
7
SHUTTER SPEED
SELECT
EXIT
1/30
S
FZ2‑B.book 48 ページ ２００３年７月２２日 火曜日 午後１時４６分
