Recording images (basic)
32
• If you press the shutter button fully at once, the camera shake may occur or the
focus may not be adjusted properly.
• Even when the focus indication is displayed and the focus is properly adjusted, it
will be cancelled if you release the shutter button.
Press the button halfway again.
• When power saving time is set, if you do not operate the camera for a while, it is
automatically turned off at the set time. To operate the camera again, press the
shutter button or turn the camera switch first to [OFF] and then to [ON]. (P86)
• The brightness of the LCD monitor/Viewfinder may differ from that of the recorded
pictures. In particular, when taking pictures in dark places with a long time
exposure, darkness appears on the LCD monitor/Viewfinder, but the recorded
pictures are bright.
• If the exposure is not properly set, the colour of the aperture value and the shutter
speed on the LCD monitor/Viewfinder becomes red.
• In the following cases, the focus may not be adjusted properly.
1 Recording a scene including subjects both near and far
2 Recording a scene over the dirty glass
3 Recording surrounding a shining scene
4 Recording in a dark place
5 Recording moving subject
6 Recording a subject with a little contrast
7 Recording with the camera shake
• We recommend that you set the clock setting again before taking pictures.
• When the brightness of the LCD monitor/Viewfinder changes such as zooming or
panning, you may hear a click sound from the lens or the image on the LCD
monitor/Viewfinder may change suddenly; this is not a malfunction. The sound is
caused by the camera automatically adjusting the aperture value.
• When pressing the shutter button halfway, the LCD monitor/Viewfinder may
become dark or bright for a moment; this is not a malfunction. This arises from
adjusting the aperture value.
• When the camera is [OFF], this camera chatters if it is shaken. However, this is not
a malfunction.
About the camera shake
• Be careful to prevent the camera shake when you press the shutter button.
• When the camera shake is easy to happen, the camera shake alert
1
appears.
• We recommend you to use a tripod when the camera shake alert appears.
1600
P
F2.8
1/8
FZ2‑B.book 32 ページ ２００３年７月２２日 火曜日 午後１時４６分
