file:///C|/U
...tabi/AppData/Local/Temp/Rar$EXa0.550/viewing/SGML_VIEW_DATA/ALL/DMC-FZ1000P/SVC/DSC1407014CE/doc/DSC1407014CE_10.xml[11/12/2018 5:16:37 PM]
10.4 After Adjustment
10.4.1 Initial Setting
Since the initial setting has been released to execute the built-in adjustment software, it should be set up again before shipping the camera to the customer.
Refer to the procedure described in “3.5.2. Initial Settings” for details.
[ IMPORTANT ]
1. The initial setting should be done again after completing the alignment. Otherwise, the camera will not work properly.
Therefore as a warning, the camera display a warning symbol “ ! ” on the LCD monitor every time the camera is turned off.
2.
Confrm that status of all adjustment fag show “F”. Even if one of the adjustment fag shows “0”, initial setting programmed is never executed.