file:///C|/U
...tabi/AppData/Local/Temp/Rar$EXa0.550/viewing/SGML_VIEW_DATA/ALL/DMC-FZ1000P/SVC/DSC1407014CE/doc/DSC1407014CE_10.xml[11/12/2018 5:16:37 PM]
Fig. 3-2
In case of setting the status fag into set condition again without completion of the alignment, the status fag should be UNDO by using ROM BACKUP
function.
10.3.1.3 Execute Adjustment
(In case of “OIS Adjustment”)
1.
Perform step “10.3.1.1.” to “10.3.1.2.”, to reset the OIS fag status “F” (Set) to “0” (Reset)
2. Press [ DISP. ] button after Flag reset.
OIS Adjustment screen is displayed on the LCD panel. (Refer to Fig.3-3)
3. Press the [ Shutter ] button.
The adjustment will start automatically.
4. When the adjustment is completed successfully, adjustment report menu appears with Green OK on the LCD monitor. (Refer to Fig.3-4)
Fig. 3-3
Fig. 3-4
10.3.1.4 Attention point during Adjustment
1.
Step “10.3.1.3.” procedure shows OIS adjustment as an example. To perform the adjustment, refer to the “10.3.2. Adjustment Specifcations” table which
shows key point for each adjustment.
2. Do not move the light box, the camera or the chart while adjusting. If one of these is moved accidentally, start the adjustment again.