Panasonic Lumix DMC-FX90EB, Руководство по эксплуатации

Страница: 170 / 193

Others
- 170 -
[Memory card parameter error]/[This memory card cannot be used]
> Use a card compatible with this unit. (P14)
– SD Memory Card (8 MB to 2 GB)
– SDHC Memory Card (4 GB to 32 GB)
– SDXC Memory Card (48 GB, 64 GB)
[Insert SD card again]/[Try another card]
• An error has occurred accessing the card.
> Insert the card again.
> Insert a different card.
[Read Error/Write Error
Please check the card]
• It has failed to read or write data.
> Remove the card after turning the power [OFF]. Insert the card again, turn the power on,
and try to read or write the data again.
• The card may be broken.
> Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the
card]
• Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures.
• In the event that it stops even after using a “Class 4” card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format (P47) .
• Depending on the type of the card, motion picture recording may stop in the middle.
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
>
If you want to delete some pictures, format the card after saving necessary data on a PC
etc. (P47)
>
Insert a different card.
[A folder cannot be created]
• A folder cannot be created because there are no remaining folder numbers that can be used.
>
Format the card after saving necessary data on a PC etc. (P47) If you execute [No.Reset]
in the [Setup] menu after formatting, the folder number is reset to 100. (P45)
[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]
• Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect.
(P46)
• This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer. (P154 ,
157)
[Recording failed.]
• You may not record when the recording location is too dark/too bright, or if the subject does
not have enough contrast when recording in 3D.
[This battery cannot be used]
• Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or your nearest Service Centre.
• If the battery terminal is dirty, clean it and remove any objects.