- 169 -
Others
Message Display
Confirmation messages or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
[This picture is protected]
>
Delete the picture after cancelling the protect setting.
[Some pictures cannot be deleted]/[This picture cannot be deleted]
• Pictures not based on the DCF standard cannot be deleted.
>
If you want to delete some pictures, format the card after saving necessary data on a PC
[Cannot be set on this picture]
• [Title Edit], [Text Stamp] or [Print Set] cannot be set for pictures not based on the DCF
standard.
[Not enough space on built-in memory]/[Not enough memory on the card]
• There is no space left on the built-in memory or the card.
• When you copy pictures from the built-in memory to the card (batch copy), the pictures are
copied until the capacity of the card becomes full.
[Some pictures cannot be copied]/[Copy could not be completed]
• The following pictures cannot be copied.
– When a picture with the same name as the picture to be copied exists in the copy
destination. (Only when copying from a card to the built-in memory.)
– Files not based on the DCF standard.
• Moreover, pictures recorded or edited by other equipment may not be copied.
[Built-In Memory Error
Format built-in memory?]
• This message will be displayed when you format the built-in memory on a PC.
>
Format the built-in memory on the camera again.
The data on the built-in memory
will be deleted.
[Memory card error.
This card cannot be used in this camera.
Format this card?]
• It is a format that cannot be used with this unit.
>
Insert a different card.
>
Format the card again with the camera after saving necessary data on a PC etc.
Data will be deleted.
[Please turn camera off and then on again]/[System Error]
• This message appears when the camera is not operating properly.
>
Turn the camera off and on. If the message persists, contact the dealer or your nearest
Service Centre.
