Recording pictures (basic)
43
Optical Image Stabilizer [STABILIZER]
This mode recognizes and compensates
jitters. You can reduce blurring caused by
jitters when you hold the camera with one
hand for taking a picture of yourself or
when you take pictures indoors where the
shutter speed is slowed down.
1
Optical Image Stabilizer button
1
Keep pressing the stabilizer
button until [STABILIZER]
appears and then select the
stabilizer function mode.
• The stabilizer function may not work
sufficiently in the following cases.
– When too much jitter occurs.
– In digital zoom range.
– When taking pictures while following
subjects in motion.
– When the shutter speed is extremely
slow due to dark conditions or other
reasons.
• For jitters, refer to P30.
• In simple mode [
] or [SELF
PORTRAIT] in scene mode (P52), the
stabilizer function mode is fixed to
[MODE2].
• In Motion image mode [
], [MODE2]
cannot be set, and the stabilizer function
menu does not appear.
1
SELECT
SET
MODE1
MODE2
OFF
STABILIZER
MODE1
(
)
The stabilizer operates
continuously and can assist
during photocomposition.
MODE2
(
)
The stabilizer function is in
standby and activates at the
moment the shutter captures the
image. This mode offers a
greater degree of stabilization.
Usually, we recommend setting
to [MODE2].
OFF
(
)
When image stabilization is not
needed.
FX2_7-ENG.book 43 ページ ２００４年７月２８日 水曜日 午後９時３９分
