Recording pictures (basic)
39
∫
Shutter speed for each flash mode
¢
The shutter speed changes depending
on the slow shutter setting. (P65)
∫
When using the photo flash
• Do not stare at the photo flash from
close proximity when using the flash.
• If you bring the flash too close to the
subjects, they may appear distorted or
discoloured by its heat and lighting.
• Do not cover the photo flash with your
fingers or any other items.
• When you take a picture beyond the flash
control range, the exposure may not be
adjusted properly and the picture may
become bright or dark.
• When you repeat taking a picture,
recording may be disabled even if the
flash is activated. Take a picture after the
card access lamp disappears.
• When the jitter alert appears, we
recommend using the flash.
• When you set to burst mode or auto
bracket, only 1 picture is recorded for
every flash activated.
• The flash icon turns red when activating
the flash and pressing the shutter button
halfway.
• When the flash is being charged, the flash
icon blinks red, and you cannot take a
picture even when you press the shutter
button fully.
• While the flash is being charged in
economy mode, the LCD monitor is off.
• When taking a picture with the flash, the
white balance will be automatically
adjusted [except for [
] (Daylight)], but
the white balance may not be properly
adjusted if the photo flash is insufficient.
• When the shutter speed is fast, the flash
effect may not be sufficient.
• To avoid picture noise, we recommend
setting [PICT.ADJ.] to [NATURAL]. (P66)
• Refer to P62 for the ISO sensitivity.
Flash mode
Shutter speed (sec.)
: AUTO
1/60 – 1/2000
: AUTO/Red-eye reduction
1/60 – 1/2000
: Forced ON
: Forced ON/Red-eye reduction
1/60 – 1/2000
: Slow sync./
Red-eye reduction
1 / 8
¢
– 1/2000
: Forced OFF
1/8
¢
– 1/2000
8 – 1/2000
[In [NIGHT SCENERY] in
scene mode (P52)]
FX2_7-ENG.book 39 ページ 2004年7月28日 水曜日 午後9時39分