33
(ENG) SQT0840
Wireless transmitter
Battery Charger (Panasonic VSK0801):
Information for your safety
Battery Pack (lithium-ion) (Panasonic DMW-BCM13E):
Information for your safety
Crash resistance
perfomance
The test method of the camera is in compliance with
“MIL-STD 810F Method 516.5-Shock”
¢
.
¢
“MIL-STD 810F Method 516.5-Shock” is the test method
standard of the U.S. Defense Department, which specifies
performing drop tests from a height of 122 cm, at 26 orientations
(8 corners, 12 ridges, 6 faces) using 5 sets of devices, and
passing the 26 orientation drops within 5 devices.
(If failure occurs during the test, a new set is used to pass the
drop orientation test within a total of 5 devices)
•
Panasonic’s test method is based on the above “MIL-STD 810F Method
516.5-Shock”. However, the drop height was changed from 122 cm to
200 cm dropping onto 3 cm thick plyboard. This drop test was passed.
(Disregarding appearance change such as loss of paint or
distortion of the part where drop impact is applied.)
There is no guarantee of not breaking or malfunctioning
under all conditions.
Withstand Load
Performance
100 k
g
f (According to the test conditions specified by Panasonic)
Dustproof
performance
Equivalent to IEC 60529 “IP6X”.
Compliance standard
IEEE 802.11b/g/n (standard wireless LAN protocol)
Frequency range used
(central frequency)
2412 MHz to 2462 MHz (1 to 11ch)
Encryption method
Wi-Fi compliant WPA
TM
/WPA2
TM
Access method
Infrastructure mode
Input:
AC
110 V to 240 V, 50/60 Hz, 0.2 A
Output:
DC
4.2 V, 0.65 A
Operating
temperature:
0
o
C
¢
to 40
o
C
¢
The battery cannot be recharged in a temperature less than
0
o
C. (The [CHARGE] indicator blinks when the battery
cannot be recharged.)
Voltage/capacity:
3.6 V/1250 mAh
DMC-FT6&TS6GN-SQT0840_eng.book 33 ページ ２０１５年３月５日 木曜日 午後２時２０分
