Before Use
- 6 -
Care of the camera
Remove the lens cover seal
A
before use.
Do not subject to strong vibration, shock, or pressure.
•
The lens, LCD monitor, or external case may be damaged if used in
following conditions.
It may also malfunction or image may not be recorded.
–
Drop or hit the camera.
–
Sit down with the camera in your trousers pocket or forcefully
insert it into a full or tight bag, etc.
–
Attach any items such as accessories to the strap attached to the
camera.
–
Press hard on the lens or the LCD monitor.
This camera is not dust/drip/water proof.
Avoid using the camera at location with a lot of dust, water,
sand, etc.
•
Liquids, sand and other foreign material may get into the space
around the lens, buttons, etc. Be particularly careful since it may not
just cause malfunctions, but it may become unrepairable.
–
Places with a lot of sand or dust.
–
Places where water can come into contact with this unit such as
when using it on a rainy day or on a beach.
∫
About Condensation (When the lens or the LCD monitor
is fogged up)
•
Condensation occurs when the ambient temperature or humidity
changes. Be careful of condensation since it causes lens or LCD
monitor stains, fungus and camera malfunction.
•
If condensation occurs, turn the camera off and leave it for about
2 hours. The fog will disappear naturally when the temperature of
the camera becomes close to the ambient temperature.
DMC-3D1PDF-VQT3U43_mst.book 6 ページ ２０１１年１０月２４日 月曜日 午後１時９分