Playback/Editing
- 112 -
∫
Operations performed during slide show
•
Normal playback resumes after the slide show finishes.
∫
Changing the slide show settings
You can change the settings for Slide Show Playback by selecting
[Effect] or [Setup] on the slide show menu screen.
[Effect]
This allows you to select the screen effects or music effects when
switching from one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
•
When [URBAN] has been selected, the picture may appear in black and white as a screen
effect.
•
[AUTO] can be used only when [Category Selection] has been selected. The pictures are
played back with the recommended effects in each category.
•
During the [Motion Pic. Only] slide show, [Effect] is fixed to [OFF].
•
Some [Effect] will not operate when playing back pictures displayed vertically.
[Setup]
[Duration] or [Repeat] can be set.
•
[Duration] can be set only when [OFF] has been selected as the [Effect] setting.
1
Display control panel by touching screen.
•
If no operation is done for 2 seconds, it will return to original status.
2
Operate control panel by touching.
Play/Pause
Exit slide show
Back to previous picture
(while pausing/playing back
motion pictures)
Ahead to next picture
(while pausing/playing back
motion pictures)
Increase volume level
Reduce volume level
Item
Settings
[Duration]
[1 SEC.]/[2 SEC.]/[3 SEC.]/[5 SEC.]
[Repeat]
[ON]/[OFF]
[Sound]
[OFF]:
There will be no sound.
[AUTO]:
Music is played when the still pictures are played
back, and audio is played when the motion pictures
are played back.
[MUSIC]:
Music is played back.
[AUDIO]:
Audio (only for motion pictures) is played back.
DMC-3D1PDF-VQT3U43_mst.book 112 ページ ２０１１年１０月２４日 月曜日 午後１時９分