18
8-4 Charging/Discharging Schedule Setting
• Set the (A) charge start time/(B) charge end time/(C) discharge start time/(D) discharge end time to be used in the
programmed charge/discharge time mode for the stand-alone system.
* This setting is only effective when the programmed charge/discharge time mode is selected for the stand-alone system. If you
are using the remote-control system, the specified date/time setting will only take effect when the remote-control is disabled.
* Note that you cannot obtain the desired results if the date/time setting is incorrect.
• Refer to 8-1 to select the charging/discharging schedule setting in the user setting mode [no- 3].
• Press "MENU (ENTER)" to switch to the display mode in the charging/discharging schedule setting.
Press "DATA (▲)" and "CLOCK (▼)" to switch the display item. The currently set schedule will be displayed.
• Press "MENU (ENTER)" in the display mode to switch to the setting mode.
• The date/time must be set in the order of (A: hour) => (A: minute) => (B: hour) => (B: minute) => (C: hour) => (C:
minute) => (D: hour) => (D: minute).
Use "DATA (▲)" and "CLOCK (▼)" to set/check the blinking value correctly and then press "MENU (ENTER)" to
confirm the setting.
Press “MENU (ENTER)” to move to the next item.
• Press “ON/OFF (CANCEL)" to cancel the setting and switch to the display mode.
• Press "MENU (ENTER)” after setting D: Minute to switch to the display mode.
• Press "DATA (▲)" and "CLOCK (▼)" in display mode and check that the setting value is correct.
• Press “ON/OFF (CANCEL)" in the display mode to return to the item display [no- 3].
Setting mode
• Blinking digits can be changed
with the "DATA (▲)" or
"CLOCK (▼)"
• Change configurable items with
"MENU(ENTER)"
• Return to the display mode
with "MENU(ENTER)" after
“D: Set Minute”.
A:Set Hour [A
10
.00]
→ A:Set Minute [A10.
00
]
→ B:Set Hour [b
12
.00]
→ B:Set Minute [b12.
00
]
→ C:Set Hour [c
14
.00]
→ C:Set Minute [c14.
00
]
→ D:Set Hour [d
16
.00]
→ D:Set Minute [d16.
00
]
Display mode
User setting mode
(Item select)
Set Charging and
Discharging schedule
Charging/Discharging Schedule Setting
Show the
current setting
(Example)
Battery remains
Full charge
100
20
Low Discharge
Time chart of battery remains
Stop
[A10:00] [B12:00][C14:00] [D16:00]
Stop
Stop
Charge
Dis-
charge
