Panasonic LB75U - XGA LCD Projector Скачать руководство пользователя

Страница: 19 / 62

Basic O

eration

Switching the projector on/off

NGLISH - 19

Before switching on the projector,

make sure the power cord and all the other devices are connected correctly.

See “Connections” on page 17 and “Power cord” on page 18.

By control panel operation

Make sure

CONTROL PANEL

OPTION

menu is

set to

VALID

. The

POWER

button is locked to

prevent malfunction and the

POWER LOCK

indicator lights in red.

1. Press the

RELEASE

button.

The

POWER LOCK

indicator goes off.

Without any operation in 10 seconds, the

POWER

button will be locked again.

2. Press the

POWER

button in 10 seconds.

The

POWER

button beeps once.

3. The

POWER

indicator flashes in green several

times.

4. The

POWER

indicator lights in green and displays

the startup logo for 30 seconds.

When the

STARTUP LOGO

OPTION

menu is set

OFF

, the startup logo will not be displayed. See

“STARTUP LOGO” on page 34.

By remote control operation

1. Press the

POWER

button.

2. The

POWER

indicator flashes in green several

times.

3. The

POWER

indicator lights in green and displays

the startup logo for 30 seconds.

When the

STARTUP LOGO

OPTION

menu is set

OFF

, the startup logo will not be displayed. See

“STARTUP LOGO” on page 34.

By direct power on function

You can switch on the projector by connecting the
power cord. See “Direct power on function” on
page 18.

Switching on the projector

FUNCTION

RETURN

INPUT SELECT

RELEASE

(3 ‑ 4)

(

)

(

)

(2)

(2 - 3)

(1)

NOTE:

• When starting up the projector, some small rattling or tinkling sound may be heard, or the display may flicker for the

characteristics of the lamp. Those are normal and will not affect the performance of the projector.

• When the internal cooling fan is operating, some, operational sound may be heard. The loudness of the operational sound

depends on the external temperature.

• If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take

a while to start the projection.

• Operating the control panel buttons with covered hand, such as plastered or gloved, may result in fail.

Содержание LB75U - XGA LCD Projector































































Результаты поиска

Содержание LB75U - XGA LCD Projector

Отзывы:

Похожие инструкции для LB75U - XGA LCD Projector

Бренды по названию

Популярные бренды

Panasonic LB75U - XGA LCD Projector, Руководство по эксплуатации

Результаты поиска

Содержание LB75U - XGA LCD Projector

Отзывы:

Похожие инструкции для LB75U - XGA LCD Projector

Бренды по названию

Популярные бренды