Panasonic LB75U - XGA LCD Projector Скачать руководство пользователя | Manualshive

Страница: 18 / 62

background image

E

NGLISH - 18

B

asi
c Op

eration

Switching the projector on/off

J

Connecting

1. Make sure the shape of the power plug and the

AC IN

terminal on the back of the projector match,

then push the plug all the way in.

2. Align the side of the power cord secure lock with

the side guide rail of the

AC IN

terminal of the

projector and slide it in.

3. Place the latch to the latch catcher and press until

it clicks.

4. Connect the power cord to a wall outlet.
5. The

POWER

and

POWER LOCK

indicators light

in red and the projector stays in standby mode.

J

Direct power on function

If the

DIRECT POWER ON

in

OPTION

menu is set

to

ON

, connect the power cord to a wall outlet and

the projection will start even when the control
panel is disabled or the

POWER

button is locked.

See “DIRECT POWER ON” on page 35.
If the

DIRECT POWER ON

is set to

OFF

, the

projector will be at the same mode as last
unplugged, standby mode or projection mode.

J

Disconnecting

1. Unplug the power cord from the wall outlet.
2. Depress the latch and slide the cover off.

3. Slide the power cord secure lock up along the side

guide rail and remove.

4. Hold the plug and unplug the power cord from the

AC IN

terminal on the back of the projector.

POWER

indicator lights in orange if the internal

cooling fan is still operating by internal power supply.

J

Direct power off function

You can switch off the electric power supply any
time by unplugging the power plug from the wall
outlet or by switching off the main power. The
internal lamp cooling fan keeps operating by the
internal power supply, and stops automatically
when cooled enough.

Power cord

Rail guide

Latch

Latch

Rail guide

NOTE:

• Do not use other than a provided power cord.
• Ensure all the input devices are connected and turned off before connecting the power cord.
• Do not force the connector as this may damage the projector and/or the power cord.
• Dirt or dust build-up around plugs may cause fire or electrical hazards.
• Switch off the power to the projector when not in use.
• If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take

a while to start the projection.

• If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take

a while to start the projection.

• Do not put the projector into the carrying bag with the

POWER

indicator lit.

«
...
16
17
18
19
20
...
»

Содержание LB75U - XGA LCD Projector































































Отзывы:

Нет отзывов

Похожие инструкции для LB75U - XGA LCD Projector

REALIS WUX10 MARK II D

Бренд: Canon Страницы: 12

Бренд: Barco Страницы: 24

Бренд: 3M Страницы: 14

Бренд: Madrigal Imaging Страницы: 138

Бренд: Panasonic Страницы: 226

Бренд: Panasonic Страницы: 1

PTL785U - LCD PROJECTOR UNIT

Бренд: Panasonic Страницы: 84

Бренд: Walimex Pro Страницы: 21

ImagePro 8795H-RJ

Бренд: Dukane Страницы: 2

Бренд: ADJ Страницы: 4

StarFrame Series

Бренд: Elite Screens Страницы: 5

Бренд: Optoma Страницы: 2

STC-SLAC Series

Бренд: Emerson Страницы: 8

SolaHD STC-DRS Series

Бренд: Emerson Страницы: 8

SOLAHD STCPOE65FF

Бренд: Emerson Страницы: 4

SolaHD SPD200K Series

Бренд: Emerson Страницы: 20

Бренд: Dukane Страницы: 44

Бренд: Vivo Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды