45
Installing KY-B64CA
KY-B64CA can be fitted flush when installing.
Flush-fitting
■
Only suitable for installation on heat and water resistant worktops such as
marble, natural stone, solid wood (if cut out edges are sealed).
■
Mount onto other types of worktops only with the recommendation of the worktop
manufacturer.
■
Remove the cushion from the underside of the appliance before flush fitting.
■
The internal width of the base unit must be at least as wide as the internal cut-out
width for the hob. This is to ensure that the casing can be easily removed for
maintenance.
■
Before sealing in, test that the appliance works. Grout the perimeter using a
heat resistant silicone. Smooth the seal with a suitable finishing product. Follow
the silicone instructions and do not turn on the appliance until the silicone is
completely dry.
CAUTION
■
Please observe the diagrams for the cut-out dimensions in granite
and marble worktops.
■
Using unsuitable silicone may cause permanent colour changes
to marble worktops
CAUTION
■
Do not try to remove the appliance by prying it out from above.
490
560
594
17
5.5
R3
R3
29
50
524
Uninstalling the Hob KY-B64CA
■
Disconnect the appliance from the mains.
■
Remove the silicone seal from the perimeter with a suitable tool.
■
Push the appliance upwards from below to remove it.
(measurement: mm)
