manualshive.com logo in svg

Panasonic KXTG6500B - 2LINE 5.8G MULTI H/S, Руководство по эксплуатации

Поделиться
Скачать
Panasonic KXTG6500B - 2LINE 5.8G MULTI H/S Скачать руководство пользователя страница 94

94

If the Following Appear on Your Display...

Troubleshooting

If the handset display shows error messages, see “If the Following Appear on 
Your Display...” (p. 92–94) for the Cause & Remedy.

Telephone System

Display message

Cause & Remedy

Wrong handset

Refer to manual

•

The accessory handset for this base unit is 
KX-TGA650. To order, see page 3. Your handset is 
not for this base unit. Your handset is for KX-TG5200/
KX-TG5202/KX-TG5210/KX-TG5212/KX-TG5230/
KX-TG5240/KX-TG5243/KX-FPG391 base unit. 

Problem

Cause & Remedy

“

No link to base.

Move closer to
base and try
again.

” is displayed and an 

alarm tone sounds.

•

The handset has lost communication with the 
base unit. Walk closer to the base unit, and try 
again.

•

Confirm the base unit’s AC adaptor is plugged in.

•

Raise the base unit antennas.

•

The handset’s registration may have been 
canceled. Re-register the handset (p. 90, 91).

Static, sound cuts in/out, fades. 
Interference from other 
electrical units.

•

Move the handset and base unit away from 
other electrical appliances (p. 6).

•

Walk closer to the base unit.

•

Raise the base unit antennas.

•

Turn on the Clarity Booster feature (p. 36).

•

If the unit is connected to a telephone line with 
DSL service, you may hear noise from the 
receiver or speaker during conversations. We 
recommend connecting a noise filter (contact 
your DSL service provider) to the telephone line 
between the base unit and the telephone line 
jack.

The base unit/handset does 
not ring.

•

The ringer volume is turned off. Set to high, 
medium, or low (p. 24, 25).

•

If more than 1 other user is using the handset 
and/or base unit, the handset/base unit may 
not ring. Users will hear incoming call tones 
(p. 68) during a call or in room monitor mode.

The handset display is blank.

•

If the handset display is blank, fully charge the 
battery (p. 16).

TG6500.book  Page 94  Friday, June 25, 2004  6:56 PM

Содержание KXTG6500B - 2LINE 5.8G MULTI H/S













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды