Panasonic KXF-033C, Руководство по эксплуатации

Страница: 45 / 46

Chapter 2 OPERATION Section 6 CHANGING MACHINE SET UP
Page 6-1
6
Section 6 CHANGING MACHINE SET UP
1. Loosen four lock handles which are
on the upper and lower side of a
magazine to adjust the width.
magazine width =
board width + 0.5 mm
2. When you set a magazine, adjust the
rail fixed side and the magazine fixed
side.
3. Be careful not to let the bottom of a
magazine be smeared by dust. There
may be some troubles when you put a
board in a magazine.
033C-E-OMA06-A01-00
6-1 Process of Change
6-1-1 Magazine
movable side lock handle
004C-PS012
033C-PS013
004C-PS014
1. Adjust the position of the pusher
according the size of a board.
2. Set the position of the pusher to the
center of the board.
3. If you push the edge of a board, the
board will get out of position and
sometime be locked.
4. When you correct the position of the
cylinder, adjust two scales not to
distort the cylinder and lock handles
(two) on the cylinder.
lock handle
board
scale
6-1-2 Pusher