Panasonic KXF-033C, Руководство по эксплуатации

Страница: 44 / 46

Chapter 2 OPERATION Section 5 DAILY OPERATION
Page 5-4
1) Stop production by production counter
Count up the production counter, the machine will stop automatically.
After send the last board, output the production stop signal to the next process to tell the
production is finished.
2) Production end production end switch
When you want to finish the production before the production counter counts up, press
"prod.stop" then the machine will stop taking out boards.
In this case, when the boards demand signal comes from the next process, the machine
will output the production stop signal.
3) Interrupt production temporary
Turn the "MANU./AUTO." switch to "MANU".
Then you can do manual operation with the switch on the panel. If you want to restart
automatic operation, go back to the state before you interrupt production, then turn the
switch to "AUTO".
033C-E-OMA05-A01-00
5-2 Production End and Interrupt Production