About Headset
You can connect a headset to the headset jack on the
front of the unit.
A
B
Headset
Note
•
Check the headphone connector (
A
) and the
microphone connector (
B
), and then connect
the headset.
•
If a Boundary Microphone and a headset are
connected at the same time, audio from the
headset microphone is given priority, and audio
from Boundary Microphones is no longer picked
up.
•
If a general-purpose microphone and a headset
are connected at the same time, audio from
both sources is picked up.
•
If a headset is connected, audio will not be
played through the display or speakers.
Amplifier/Active Speaker
Connection
This section describes how to connect an amplifier/
active speaker.
1.
Connect the amplifier/active speaker to the Audio
Out L/R jack on the back of the unit using a stereo
pin plug cable.
Note
•
Connect the amplifier/active speaker
correctly, as follows:
–
Left channel
®
L
–
Right channel
®
R
•
For more details about the amplifier or
active speaker, refer to the documentation
for the corresponding device.
Layout example:
Place the speakers either side of the display, as follows:
Microphone
Main
video
camera
Display
Speaker
Speaker
Notice
•
Place the speakers either side of the display. If
you place the display at the front of the room
and the speakers at the back, the microphone’s
left/right spatial direction may be reversed, and
the orientation of the image and sound will not
match on the other party’s side.
28
Operating Manual
Document Version 2012-03
Preparation
