Connect to the Internet
To use KX-VC Series NAT Traversal Service, a network
environment and devices that meet the following
specifications are necessary.
Network Environment
To use KX-VC Series NAT Traversal Service to
establish video conference calls, a broadband
connection is required. (A 3-party video conference call
requires a 1.0 Mbps connection, and a 4-party video
conference call requires a 2.0 Mbps connection.)
Router
Please use a router that has been tested by Panasonic
for use with this service, and use the information from
your provider to connect to the Internet. For details
about tested routers, refer to the following web site:
http://panasonic.net/psn/products/hdvc/nat_traversal/
index.html
For details about configuring your router, refer to the
router’s documentation.
To connect the unit and router
1.
Connect the router to the LAN1 jack on the back of
the unit.
•
Connect a router to the LAN1 jack on the back
of the unit using a category 5 or greater LAN
cable. (For the LAN1 jack position, refer to
in
.)
Note
•
Operation cannot be guaranteed in the
following cases:
–
You are using a router other than one
tested by Panasonic.
–
Multiple HD Visual Communication
Units are connected to one router.
–
The HD Visual Communication Unit is
connected directly to the Internet, and
not through a router.
Obtain a Registration Key
In this procedure, you will use a computer to access the
KX-VC Series NAT Traversal Service registration page
and obtain a Registration Key. The following
information is necessary:
•
MPR ID
–
This can be confirmed on the label on the
bottom of the unit or through operating the unit.
For details, see
.
•
Activation Key No.
–
Recorded on an activation key.
•
Registration ID
–
Recorded on an activation key.
To check the MPR ID (using the
unit)
1.
Press
[MENU]
.
•
The Menu screen is displayed.
2.
Use
[
][
]
to select
"Settings"
and press
[ENTER]
.
•
The system settings screen is displayed.
3.
Press
[
][
]
to display the fourth page.
4.
Use
[
][
]
to select
"Enhancement"
and press
[ENTER]
.
•
The enhanced feature confirmation screen is
displayed. Check the field
"MPR ID"
(
A
).
A
5.
Press
[HOME]
.
•
The Home screen is displayed.
138
User Manual
Document Version 2015-08
Using the KX-VC Series NAT Traversal Service
