Information Display
Setting
Description
Value Range
Default
Information Display
View a variety of information about
the unit. Press
[ ]
and
[ ]
to display
the various settings. The following
settings can be viewed:
•
Firmware Version
•
KEM 1 Firmware version (if an
optional KX-UTA336 is
installed)
•
KEM 2 Firmware version (if a
second optional KX-UT336 is
installed)
•
MAC Address
•
Serial Number
•
Line status
•
IP Address
•
Subnet Mask
•
Default Gateway
•
DNS1
•
DNS2
•
IPv6 Address
•
IPv6 Prefix Length
•
IPv6 Default Gateway
•
IPv6 DNS1
•
IPv6 DNS2
•
IP Phone VLAN ID
•
PC VLAN ID
•
IEEE802.1X Status
•
Display Lock
—
—
*1
"KEM" refers to the KX-UTA336 Add-on Key Module in this manual.
Status Message
Setting
Description
Value Range
Default
Status Message
View a list of status messages for the
unit. Press
[ ]
and
[ ]
to display the
various messages.
—
—
Network Settings
IMPORTANT
We recommend configuring these settings with your administrator or dealer. Network settings can also be
configured through Web user interface programming (Page 62). Contact your administrator or dealer for
further information.
52
Operating Instructions
Document Version 2014-11
Customizing the Telephone