Panasonic KX-UTG300 Скачать руководство пользователя страница 17

Страница: 17 / 108

Icon

Description

Displayed when the Bluetooth feature is activated and connected to a device.
(Page 76).

Displayed when ECO mode is enabled.

Displayed when a firmware upgrade is available.

Displayed when a USB flash drive is connected to the unit.

Line Icons

Line icons indicate the status of lines in the Phone or Call log screens.

General Line

Icon

Shared Line

Icon

Description

Displayed when registering to the SIP server.

Displayed when registration to the SIP server has been lost. If this icon
is displayed, consult your administrator or dealer.

Indicates the line is registered to the SIP server.

Displayed when the line is on a call.

Displayed when the line has an incoming call.

Displayed when there is a held call recalling.

Indicates that DND (Do not Disturb) settings are active for the line.

Indicates that call forwarding settings are active for the line.

Indicates that auto answer settings are active for the line.

—

Displayed next to lines that have new messages (Page 30).

—

Indicates that there was a missed call. This icon also indicates a missed
call in the call log.

Shared line is an optional feature and may not be supported on your phone system. See Page 32 for information.

Call Icons

Call icons indicate the status of calls and lines in the Phone screen.

Icon

Description

Displayed when dialing on-hook.

Document Version 2014-11

Operating Instructions

Before Operating the Telephone

Содержание KX-UTG300













































































































Результаты поиска

Содержание KX-UTG300

Отзывы:

Бренды по названию

Популярные бренды

Panasonic KX-UTG300, Руководство по эксплуатации

Результаты поиска

Содержание KX-UTG300

Отзывы:

Бренды по названию

Популярные бренды