Troubleshooting
Problem
Possible Cause
Solution
The handset does not
work.
The batteries are drained.
Charge the batteries fully.
For details, see "Charging the
Batteries (Page 49)".
The power is off.
•
Turn it on.
For details, see "Location of
Controls (Page 15)".
•
Re-insert the batteries, and then
set the handset on the charger.
For details, see "Battery
Installation (Page 48)", and
"Charging the Batteries
(Page 49)".
The handset does not
ring.
Ringer volume is set to "
Off
".
(If the ringer volume is set to
"
Off
", is displayed.)
Adjust the ringer volume level.
For details, see "Adjusting the Ringer
Volume (Page 25)".
Silent Mode is on.
(If Silent Mode is on, the icon is
displayed.)
Turn off Silent Mode.
For details, see "Silent Mode
(Page 17)".
It is difficult to have a
conversation when in
Hands-free mode.
The microphone is facing the
wrong direction or is obstructed
during the conversation.
The front of the handset should face
you, and the microphone should not
be covered. You can also place the
phone so that it stands vertically. For
details, see "Location of Controls
(Page 15)".
You cannot make/
receive a call.
The handset is out of range, or the
CS is busy.
Move closer to the CS or try again
later.
The radio channel is busy, or a
radio communication error
occurred.
Try again later.
You cannot dial.
The number that you dialled is
restricted by your phone system.
Consult your administrator or dealer.
Key lock mode is on.
To cancel the mode, press and hold
for about 2 seconds.
For details, see "Key Lock
(Page 17)".
The radio channel is busy or a
radio communication error
occurred.
Try again later.
52
Operating Instructions
Document Version 2012-11
Appendix
