Panasonic KX-TVS120, Руководство по установке

Страница: 362 / 436

MESSAGE MANAGER'S GUIDE
362 Installation Manual
D7 REMOTE CALL FORWARDING SET
The Message Manager can program his extension (assigned for Operator 1 in the Day Mode)
from a remote location to forward various types of calls to a desired extension or an outside
telephone. There are six forwarding settings available:
• FWD All—Forward all incoming calls to a desired extension number.
• FWD Busy—Forward all incoming calls to a desired extension number when the line is
busy.
• FWD No Answer—Forward all incoming calls to a desired extension number when there is
no answer.
• FWD Busy or No Answer—Forward all incoming calls to a desired extension number when
the line is busy or there is no answer.
• FWD to CO—Forward all incoming calls to Telephone number 1 or 2 (preprogrammed in
the Mailbox Setting), or to any other telephone number.
• FWD Cancel—Cancel the forwarding setting.
Notes:
• The Remote Call Forwarding Set feature is available with DPT Integration only.
• By default, the extension number for the Message Manager's extension (assigned for
Operator 1 in the Day Mode) is "0". However, the default setting cannot be used with
this feature. When using this feature, you must assign the extension number that is
included in the Extension Numbering Plan.
• FWD to CO must be enabled in the COS (Class of Service) setting to be utilized (see
"Remote Call Forward to CO" in Table 45 in
B3 SYSTEM ADMINISTRATION—
SETTING COS (CLASS OF SERVICE) PARAMETERS ).
Assigning Remote Call Forwarding Set
1.
Log in the Main Menu.
2.
Press [6] to set Remote Call Forwarding.
3.
Press [1], [2], [3], [4], [5], or [6] to select the desired forwarding setting.