Panasonic KX-TVS120, Руководство по установке

Страница: 312 / 436

SYSTEM ADMINISTRATOR'S GUIDE
312 Installation Manual
The following parameters can be programmed using "0-9", " ", "#", and "A-D".
Note
Default values in the above table vary depending on the settings of "PBX type" and "Inband
Integration" (PBX Interface Parameters).
To access the proper menu for Inband Signaling Parameters, follow the menu path
as shown:
System Administration Top Menu-1-6-3-2
Table 80
Parameter Value Range
(Default)
Description/Function
Ringback
(1)
Indicates "Ringback Tone". Sent to the VPS when the
extension dialed is ringing.
Busy
(2)
Indicates "Busy Tone". Sent to the VPS when the
extension dialed is busy.
Reorder
(3)
Indicates "Reorder Tone". Sent to the VPS when an
invalid extension number is dialed or when inadvertently
connected to another VPS.
DND
(4)
Indicates "Do Not Disturb Tone". Sent to the VPS if the
dialed extension has the Do Not Disturb feature enabled.
Answer
(5)
Sent to the VPS when the called extension answers the
call.
Forward to VM
Ringing
(6)
Sent to the VPS if the called extension is forwarded to a
voice mail port and that voice mail port is available to
accept the call.
Forward to VM
Busy
(7)
Sent to the VPS if the called extension is forwarded to a
voice mail port and that voice mail port is not available to
accept the call.
Forward to
Other
Extension
(8)
Sent to the VPS if the called extension is forwarded to
another, non-Voice Mail extension.
Confirmation
(9)
Sent to the VPS when it successfully dialed a Message
Waiting Lamp On or Message Waiting Lamp Off Code.
Disconnect (#9) Sent to the VPS when the other party goes "on-hook".